IOT ROUTER & GATEWAY REVERSE ENGINEERING CONSULTANCYBASE PROJECT PRICE: $10,000 USD

Reverse Engineering IoT Routers & White-Hat Security Project Booking

Led by Principal Embedded Systems & IoT Firmware Architect Iotsoftwaredeveloper Inc. (17+ years experience, Los Angeles, CA), our hardware and binary security lab performs deep-dive reverse engineering of commercial IoT routers, carrier CPE gateways, cellular/LoRaWAN industrial routers, and embedded Linux / OpenWrt firmware. Every engagement begins at a $10,000 USD base project price under a bilateral Mutual Non-Disclosure Agreement (MNDA) and explicit written Rules of Engagement (RoE).

01 // BASE RETAINER$10,000 USD Base Price

Fixed-scope 2-week router firmware unpacking, U-Boot bootloader analysis, and stripped ELF daemon decompilation starting at $10,000 USD.

02 // SILICON-TO-CLOUDPCB & Binary Forensics

UART/JTAG/SWD bus probing, SPI NOR & BGA NAND flash extraction, SquashFS/UBIFS rootfs reconstruction, and QEMU + AFL++ fuzzing harnesses.

03 // WHITE-HAT ROEAuthorized OEM & Enterprise Defense

Reproducible Ghidra/IDA databases, C/Rust remediation patches, SBOM generation, and FCC Cyber Trust Mark / EU CRA readiness.

Supported IoT Router Silicon, Bootloaders & Network Daemons

Our hardware bench and binary decompilation pipeline support full-spectrum router architectures across MIPS, ARM64, and RISC-V silicon.

Router Subsystem	Supported Targets & Architectures	Forensic & Offensive Verification
Router SoC Families	MediaTek Filogic (MT7621, MT7981, MT7986), Qualcomm IPQ (IPQ4019, IPQ8074, IPQ9574), Broadcom BCM, Realtek RTL819x	Instruction-set decompilation across MIPS32/64, ARMv7, AArch64, and co-processor DSP/NPU blobs
Bootloaders & Flash Layouts	Das U-Boot, CFE, RedBoot, ARM Trusted Firmware (TF-A), SquashFS, JFFS2, UBIFS, YAFFS2	Secure-Boot chain verification, U-Boot environment injection testing, custom LZMA/AES image unpacking
Management & WAN Daemons	uhttpd / lighttpd / GoAhead / Boa, LuCI CGI, UPnP (miniupnpd), TR-069 CWMP / TR-369 USP, dnsmasq, dropbear	Pre-auth command injection, stack/heap buffer overflow discovery, NVRAM credential & private key auditing
Hardware & RF Interfaces	UART, JTAG/SWD, SPI NOR, Parallel NAND, BGA eMMC, PCIe, Wi-Fi 6E/7, BLE, Zigbee, LoRaWAN, Cellular 5G/LTE-M	Logic analyzer capture, chip-off flash dumping, ATECC608 / TPM 2.0 probing, and wireless frame injection

Select Your IoT Router Reverse Engineering Tier

Choose from three fixed-scope router reverse engineering and white-hat security retainers (starting at $10,000 USD) or customize hardware lab add-ons below.

TIER-01 // BASE RETAINERBase Project Price — $10,000

IoT Router Firmware & Bootloader Reverse Engineering Sprint

SquashFS / UBIFS Extraction, U-Boot Analysis & ELF Daemon Decompilation

$10,000USD // 2-Week Dedicated Lab Sprint

Clean-room firmware unpacking, encrypted image decryption, U-Boot bootloader & Secure-Boot verification, and Ghidra/IDA Pro decompilation of stripped network daemons across MediaTek, Qualcomm IPQ, Broadcom, and OpenWrt routers.

Encrypted router firmware unpacking (SquashFS, JFFS2, UBIFS, LZMA/XZ) & full rootfs reconstruction
Annotated Ghidra / IDA Pro decompilation of httpd, upnpd, cwmpd (TR-069/TR-369), dnsmasq, and IPC daemons
NVRAM / mtd partition credential vault audit, hardcoded cryptographic key discovery, and backdoor screening
Comprehensive Software Bill of Materials (SBOM), kernel CVE mapping, and reconstructed C/C++ header dossier

TIER-02 // OFFENSIVE AUDITMost Requested OEM & ISP Tier

White-Hat IoT Router Penetration Testing & Zero-Day Audit

WAN / LAN / Wi-Fi / Cellular Attack Surface & Pre-Auth Exploit Validation

$15,000USD // 3-Week Offensive & Defensive Engagement

Authorized white-hat security consultancy targeting SOHO, enterprise CPE, cellular 5G/LTE-M, and industrial edge routers to uncover pre-auth RCE, command injection, and protocol parser memory corruption.

Full-stack white-hat penetration test across LuCI/CGI/REST web UI, UPnP/SOAP, TR-069 CWMP, and MQTT cloud tethers
QEMU user-mode & full-system emulation with coverage-guided AFL++ fuzzing harnesses for network parsers
Deterministic proof-of-concept (PoC) exploit scripts with CVSS v3.1 scoring and stack/heap mitigation audit
Actionable C/Rust patch remediation playbook plus 14-day post-remediation regression re-test

TIER-03 // FULL-SPECTRUM PCB LABFull-Spectrum Silicon-to-Cloud Lab

Hardware PCB Lab Teardown, Flash Chip-Off & RF Red-Team

UART / JTAG / SPI / BGA NAND Extraction, Silicon Glitching & Wireless Audit

$25,000USD // 4-Week Hardware Lab & Silicon Engagement

Physical PCB reverse engineering, non-invasive and chip-off flash extraction, hardware root-of-trust fault injection, and multi-radio RF protocol auditing for locked or potted industrial and carrier routers.

UART, JTAG, SWD pinout tracing and clean-room SPI NOR, parallel NAND, and BGA eMMC chip-off flash extraction
Hardware root-of-trust (ATECC608, TPM 2.0, ARM TrustZone, SoC eFuses) & voltage-glitching bypass assessment
Wi-Fi 6E/7, BLE, Zigbee, Thread, and LoRaWAN / Sub-GHz SDR RF packet capture & frame-injection testing
Hardened dual-bank A/B OTA bootloader architecture blueprint & executive engineering workshop

Interactive Router Project Estimator & SOW Booking Desk

Configure your router reverse engineering parameters and submit your project brief. Base engagements start at $10,000 USD.

1. Configure Hardware & Fuzzing Lab Add-Ons

Augment your $10,000+ base router engagement with clean-room chip-off extraction, QEMU fuzzing harnesses, or regulatory attestation:

Expedited 72-Hour Zero-Day / Active CVE Incident Triage SLA+$2,500

Immediate hardware lab allocation and preliminary binary exploitability readout within 72 hours.

Clean-Room BGA eMMC / TSOP NAND Chip-Off Flash Recovery Lab+$3,000

Precision hot-air/IR BGA desoldering, raw NAND ECC reconstruction, and logic-analyzer bus capture.

Turnkey QEMU Emulation & AFL++ CI Fuzzing Harness Handoff+$2,500

Containerized NVRAM-stubbed QEMU router harness enabling continuous in-house fuzzing by your team.

FCC Cyber Trust Mark, EN 303 645 & EU Cyber Resilience Act (CRA) Attestation+$2,000

Formal compliance mapping and executive board briefing for OEM certification and ISP procurement.

ACTIVE ROUTER TIER:IoT Router Firmware & Bootloader Reverse Engineering Sprint ($10,000 Base)

No optional hardware/fuzzing add-ons selected (Standard $10,000 router retainer scope)

ESTIMATED PROJECT RETAINER:$10,000 USD

Router Lab Onboarding Protocol

Mutual NDA & RoE Execution: Bilateral confidentiality and hardware authorization executed within 24 hours.
Firmware Image & Hardware Sample Handoff: Encrypted firmware transfer or dual router unit shipment to our Los Angeles embedded security lab.
Retainer Milestone & Clean-Room Kickoff: 50% kickoff retainer ($5,000 on $10,000 base projects) initiates dedicated router unpacking, decompilation, and offensive audit.

2. IoT Router Project Booking & SOW Intake

Complete the authorization dossier below to reserve embedded lab allocation and receive your Statement of Work.

Principal / Engineering Lead Name *

Corporate or Direct Email *

Organization & Target Router Model *

Direct Phone / Signal Contact

Router Consultancy Engagement Tier (Base Price $10,000 USD) *

Target Router SoC & Firmware Stack *

Desired Lab Kickoff Window *

Target Router Models, Firmware Version & Reverse Engineering Objectives *

White-Hat Authorization Attestation: I confirm that our organization owns or holds explicit legal authorization to reverse engineer and security-test the specified IoT router hardware and firmware under a bilateral Mutual NDA.

Security Verification: What is What is 6 + 6?? *